| Empennage kit | Wing Kit | Fuselage Kit | Finishing | Power Plant | Avionics | Paint | Interior |
|
|
|||||||||
|
|||||||||
| 08.13 Horizontal Stabilizer |
|
||||||||||||||||||||||||
| Step 1: Using the rivets shown in
figure !, rivet the last two HS-904 Inspar Ribs, on each side of the
stabilizer, to the HS-1002 Front Spar web. Note: The rivets used for the rest of the horizontal stabilizer can be found on Page 08.14 Figure 1. |
|||||||||||||||||||||||||
| Step 2: | |||||||||||||||||||||||||
| Step 3: | |||||||||||||||||||||||||
| Step 4: | |||||||||||||||||||||||||
| Step 5: | |||||||||||||||||||||||||
| Step 6: | |||||||||||||||||||||||||
| Step 7: |
|
||||||||
|
Note: This is my builders log and is not Intended to replace Vans Construction drawings |
||||||||
|
Disclaimer : Information contained on this Site may be out of date and /or inaccurate - Please Confirm any important data with a reliable source. |