RV BUILDER NET .COM

 

HOMEFAAEAABUILDERS LOGRV BUILDERS LISTVENDORSVANS AIRCRAFT
 08.12 Horizontal Stabilizer
08.01 08.02 08.03 08.04 08.05 08.06 08.07 08.08 08.09 08.10 08.11 08.12
08.13 08.14                    
Step 1: Put both HS-101 Skins back in the cradles. Cleco all the HS-905 Nose Ribs in place, then rivet them to the skins using the rivets shown on page 08.14 Figure 1.  
Step 2: Insert the front spar/inspar rib assembly into the skins and cleco it to the nose ribs and skins. Using the rivets shown in Figure 1, rivet the assembly to the nose ribs. If access to the two inboard nose ribs is limited, making riveting difficult, they can be riveted after the rest of the horizontal stabilizer construction is completed and removed from the cradles.  
VERTICAL STAB RUDDER HORIZONTAL STAB  ELEVATOR TAILCONE EMP ATTACH  EMP FAIRINGS  BUILDERS LOG

Note: This is my builders log and is not Intended to replace Vans Construction drawings

Disclaimer : Information contained on this Site may be out of date and /or inaccurate - Please Confirm any important data with a reliable source.