| Empennage kit | Wing Kit | Fuselage Kit | Finishing | Power Plant | Avionics | Paint | Interior |
|
|
|||||||||
|
|||||||||
| 08.10 Horizontal Stabilizer |
|
||||||||||||||||||||||||
| Step 1: Rivet the two
inboard HS-1004 inspar ribs to the flanges of HS-1016 Stringer web using
the rivets called out in figure 1. AN470AD4-4 8 Places |
|||||||||||||||||||||||||
| Step 2: Rivet the two
sets of HS1014 and HS-1015 Stringers together and to the HS-1016
Stringer Web using the rivets called out in Figure 1. AN470AD4-5 16 Places |
|
||||||||
|
Note: This is my builders log and is not Intended to replace Vans Construction drawings |
||||||||
|
Disclaimer : Information contained on this Site may be out of date and /or inaccurate - Please Confirm any important data with a reliable source. |