Step 1: Separate the R-1003 top rib parts, shown in Figure 1, into individual components: the R-1003A and R-1003B. The shaded areas shown in the figure should be completely removed. Deburr all the edges to prevent scratching during fitting. 

12/23/07

Step 2: Separate the R-1004 bottom ribs parts, shown in Figure 2, as described in step 1.

12/23/07

Step 3: Separate the R-1010 shear clip parts, shown unbent in Figure 3, as described in step 1.

12/23/07

Note: This is my builders log and is not Intended to replace Vans Construction drawings

Disclaimer : Information contained on this Site may be out of date and /or inaccurate - Please Confirm any important data with a reliable source.