|
RV BUILDER NET .COM
|
| Page 06.05 Vertical Stabilizer |
|
|||||||||||||
| Step 1: Attach the
VS-1012 Top Rudder Hinge Brackets and the VS-1017 Hinge Doubler to the
VS-1003 Rear Spar using the rivets called out in Figure 1. 07/06/08 |
 |
|||||||||||||
| Step 2: Attach the
VS-1015 Front Spar Doubler to the VS-1002 Front Spar using rivets called
out in Figure2. 07/06/08 |
 |
|||||||||||||
| Step 3: Attach the parts
shown in Figure 3 using the rivets called out. Leave the VS-1004 bottom
inspar rib and the VS-1005 Bottom Nose Rib clecoed to allow removal for
access to the interior. 07/06/08 |
 |
|
||||||||
|
Note: This is my builders log and is not Intended to replace Vans Construction drawings |
||||||||
|
Disclaimer : Information contained on this Site may be out of date and /or inaccurate - Please Confirm any important data with a reliable source. |